becauseCardan shaftIt can digest and absorb and reduce the transition of output torque of key equipment. The power system of machinery and equipment equipped with reduction gearbox will knock the journal when reducing the transition torque. Therefore, choose durable and easy-to-remove couplings to develop power. Large transmission system, environmental protection and energy saving effect is very good, viewing angle compensation work ability, stable operation, low noise, convenient disassembly and maintenance, compact and effective structure, high reliability of operation.
The torque transmitted by the universal joint shaft is very large, and its matching range is more beneficial for industrial equipment with a relatively limited rotating diameter.Commercial lubricating fluids composed of unsalted butter, calcium thickener and partial alkaline lubricating fluid are relatively dispersed in product structure.When the heavy load continues to run, the base grease is separated, so there is no oil slick in the base.After analyzing and adjusting, consider specific application regulations.The instrument panel and instrument panel sensors are used to accurately measure the application indoor space of the cross-axis axis, because the parts must be adjusted reasonably.
Because the parts are worn out in the whole process of operation, the reasonable specifications have changed, causing damage.In the whole process of operation, if the coupling components are overheated or flattened, the physical properties of the surface are changed and destroyed, and the external force isCardan shafton.This type of transformation is generally referred to as damage to the part geometry.This type of damage measurement method is basically the same as the first method.For the bending deformation of the parts, the CNC lathe can be compared with the percentage table.
Check whether the damage level and specification change of the cardan shaft are within the allowable range of the quality regulations, and whether the parts are damaged or repaired.forCardan shaftThe universal joint shaft is a part composed of two shafts.The key to the expected effect of the two-axis connection head is to complete the tightening of the anchor bolts.Such unbalanced conditions will inevitably cause shaft vibration and endanger the normal operation and service life of all mechanical equipment, so attention must be paid.