Because before installing and applying machinery and equipment, in order to better ensure stronger mutual cooperation, pleaseCardan shaftLubricate it first when it is not needed for a long time to ensure the applicability of machinery and equipment.Disassembling and disassembling the cross universal joint shaft after application is a difficult process of disassembling and disassembling the rim on the shaft.In addition, the selected equipment should conform to the appearance and specifications of the rim, and the mutual parts between all components should be marked to facilitate re-assembly.The universal joint shaft anchor bolts used in high-speed rotating machinery and equipment are difficult to install, and the characteristics of various couplings should be referred to.
For the types of cardan shafts currently used, gear couplings can be used for light-duty transmission systems with high power, and for transmission systems that require removal of heavy impact loads and shaft torsional vibrations, tire couplings can be used. For high equipment, the universal joint shaft has a high operating speed and centripetal force. The high-speed rotating shaft should use a balanced and high-precision coupling.After installation and adjustment, if the two shafts are difficult,
In the operation process, when the relative speed of the two shafts is relative, select the soft universal joint shaft.When the axial deviation is large, choose a large angular velocity or cross slider coupling andCardan shaft, In order to get a stronger practical application effect.Generally, couplings without lubrication of metal parts must have high reliability and good lubrication. Their characteristics are very susceptible to the harm of uniformity of lubrication and are likely to cause environmental pollution.
Parts of non-metallic materialsCardan shaftIt is more sensitive to temperature and corrosive substances, and is very prone to mildew and erosion. Consider specific application regulations.In the operation process, if the relative speed of the two shafts is relative, select the coupling.Because of the characteristics and hazards of the temperature difference, it is difficult to maintain the precision on both sides of the cardan shaft after assembly and adjustment.
