First of all, everyone must check the parts of these important parts of the connecting flange every day to see if there is any loose bolts. If any bolts are found to be loose, then they must be tightened immediately under such circumstances. In this way, the reinforcement effect can be achieved, thereby avoiding the loosening of the cardan shaft bolt and affecting the operation of the equipment.
Secondly, pay attention to check whether its bearings are heating or noise, and see whether the spline pair is severely worn or whether there is abnormal vibration, noise, etc. If such a situation occurs, then It is necessary to see what the cause is in time, and then remove it for replacement of parts. Never let the universal joint shaft work in a sick state.
Once again, to develop a pairCardan shaftIt is a good habit to carry out regular lubrication. Its lubrication cycle needs to be adjusted in conjunction with the use environment of the equipment itself. If the use environment is better, then its lubrication time can be prolonged. On the contrary, if the use environment is poor, you need to reduce the lubrication. The interval time.
Finally, it is necessary to regularlyCardan shaftFor maintenance, the specific maintenance time is related to the industry and on-site environment. The maintenance cycle ranges from three months to one year. Therefore, users only need to determine the appropriate maintenance cycle based on the actual situation of their own enterprise.