We are usingCardan shaftIn the process, it is inevitable that the parts will be damaged. In this case, the production may be affected. Only by solving this problem in time can we avoid the damage to our production due to the damaged parts. Then, the cardan shaft What should I do if the parts are damaged?
1, If the cardan shaft is worn during the operation process, which causes the size to change, then such a situation can be detected by suitable tools, such as selecting a micrometer, a vernier caliper, etc. to measure and timely Found breakage.
2、In actual operation, because the related parts of the cardan shaft are overheated or the extrusion is abnormal, then the performance of the equipment on the surface will also change, which will also lead to damage. This situation can be selected Use tools or other instruments to see how hard the surface is. If it exceeds the allowable range, replace parts in time.
3,becauseCardan shaftThe external force will cause the parts to bend, twist or other changes, such changes will cause the parts to wear, and this loss needs to be measured by professional tools, if there is bending deformation, then, then You need to select a dial indicator to proofread it.
4,in the case ofCardan shaftCorrosion appears on the surface of the product, so this situation can be seen directly with the eyes, and the damage degree and the size of the damage can be well determined. If the size and the damage degree are within the range allowed by the standard, then, There is no need to scrap or repair, otherwise it needs to be repaired.