How to maintain the cardan shaft when using the machine?What are the main inspections of cardan shafts every day?In addition, by using a cardan shaft connected to the sleeve interference, how should it be installed?These questions are all about cardan shafts, so answer them below.
1. When the machine is in use, what specific work should be carried out for cardan shaft maintenance?
Aspect XNUMX: The acceleration of the cardan shaft should be carried out slowly, and it is not advisable to accelerate too fast at the beginning.
Aspect XNUMX: Checking its balance is also important, so when repairing, you can't be sloppy on this point.
Aspect XNUMX: Check the cardan shaft every day to ensure that it can be used normally.
Aspect XNUMX: If the cardan shaft is used in summer or winter, the type of grease used is different and cannot be used universally.
2. Cardan shaft, its daily inspection work, what are the main contents?
The daily inspection of the universal joint shaft is also very important. Therefore, it should not be treated carelessly, so as not to affect the normal work and use of the product.Generally speaking, its inspection is mainly to check its connectors and fasteners to see if there are any problems such as looseness, and whether it can be used normally.
3. How to install the universal joint shaft sleeve with interference coupling?
In the installation work of the universal joint shaft sleeve with interference coupling, the specific operation is: use hot oil or heat to expand the shaft hole of the sleeve, so that it can be installed to match Therefore, to complete the installation work.Its heating temperature, generally, cannot exceed 200 degrees Celsius.