Tag Archives: parts for motor

China Bus Parts Rear Axle Half Shaft for Electric Motor Drive Axle drive shaft coupler

Solution Description

The illustration of Rear Axle

 

Suspension Model

AR115

 

 

Rated load(kg)

115000

Brake Variety

Disc/Drum

Rim Distance(mm)

1832

Max out Torque(Nm)

30000

Distribution Circle

10*335

Flange Variety

Plain Flange

Ratio

3.15~6.seventeen

Relevant Bus

7m Bus

Wheel Hub Sort

Bearing Device

Bodyweight(oil included)(kg)

690()Drum)/630(Disc)

The In depth Drawing of Described Rear Axle

Type: Front AXLEAF 2.2~2.7                                                                                                   Variety: Front AXLE–AF 5.5

Application: 5~7 m Mentor/Metropolis Bus                                                                                               Application: 10~eleven m Mentor/Metropolis Bus

                                                                  

Variety: Entrance AXLE–AF 75                                                                                            Sort: REAR AXLE–AR 40

Software: Above eleven m Mentor/Town Bus                                                                       Software: 5~8m Coach/City Bus
Financial system of The Axle and Suspension

In order to enhance the axle and suspension top quality, boost customer automobile knowledge, minimize after-income servicing expenses, entirely understand from domestic and international advanced axle technology, particularly in the axle wheel edge special innovation, from grease lubricated wheel edge, to oil lubricated wheel edge, and then to the maintainance free axle ans suspension wheel edge, compared with the preceding technology, there is a qualitative leap. Amongst them, there are 2 types of maintenance-free wheel edge: oil lubrication servicing-free of charge (usually five hundred,000 km maintenance-totally free) and integrated servicing-cost-free (namely bearing unit, 5 several years / 800,000 km routine maintenance-totally free).

Firm Profile

 DUOYUAN Automobile Gear CO.LTD

Duoyuan automobile tools, covers an area of far more than one hundred acres and has in excess of three hundred personnel, including far more than 90 experts and technological staff, far more than ten senior engineers, and a lot more than thirty intermediate engineers.

Our objective is to turn into the third get together skilled vehicle areas supplier with revolutionary spirit and foremost engineering. With constant development and growth for sixteen many years, we have cooperate with YuTong Group for a time period technique. Current merchandise marketplace volume: Above 400,000 items of bus particular axles, more than 250,000 kits of bus air suspensions once-a-year manufacturing ability: one hundred,000 pieces of bus unique axle and 50,000 kits of bus air suspensions. In 2018, our product sales exceeded RMB 1.5 billion.

At existing, our products are largely bus-oriented, providing matching merchandise to entire ranges of models such as passenger bus, tourist bus, team bus, general public transportation bus, school buses and new strength bus Also, we are actively increasing truck and other industrial car markets. Our products are marketed to far more than a hundred thirty international locations and regions in the globe this sort of as Cuba, Venezuela, Russia, Iran and Saudi Arabia as elements of full automobile.

In purchase to realize a far better potential, we, by upholding the spirit of exploration, discover widely from others’ robust points and absorb foreign and domestic superior experience, and strive for the improvement of China’s automotive gear.

FAQ

Q:Are you buying and selling business or producer?

A: We are manufacturing unit who have been specializing in creating and manufacturing axle and suspension for twenty a long time .
Q:Can your merchandise be personalized or modified?

A: We can style and produce the axl and suspension in accordance to customers’ demands and motor vehicle parameters .
Q: What is your phrases of payment ?
A: a hundred% Progress payment by T/T soon after signing the agreement.
Q: What is your terms of packing?
A: Typically, we place buggy axle on Wood pallets,Stretch movie fastened in wooden box . Or Client required.
Q: How prolonged is your delivery time?
A: Typically it is fifteen-twenty five days if the goods are in stock. or it is 35-forty five days if the items are not in inventory, it is in accordance to
quantity.
Q: What is your axl sample plan?
A: We can provide the buggy axle sample if we have prepared components in inventory, but the clients have to pay out the sample value and he courier price.You should make contact with with me with buggy axle.
Q. Do you examination all your buggy axle ahead of delivery?
A: Indeed, we have a hundred% check just before shipping
Q: How do you make our organization long-time period and very good partnership?
A:1. We preserve axle and suspension a excellent top quality and aggressive price to make certain our customers benefit
two. We regard every customer as our friend and we sincerely do company and make friends with them, no subject in which they arrive from.

After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:

###

Suspension Model
AR115
 
 
Rated load(kg)
115000
Brake Type
Disc/Drum
Rim Distance(mm)
1832
Max out Torque(Nm)
30000
Distribution Circle
10*335
Flange Type
Plain Flange
Ratio
3.15~6.17
Applicable Bus
7m Bus
Wheel Hub Type
Bearing Unit
Weight(oil included)(kg)
690()Drum)/630(Disc)
After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:

###

Suspension Model
AR115
 
 
Rated load(kg)
115000
Brake Type
Disc/Drum
Rim Distance(mm)
1832
Max out Torque(Nm)
30000
Distribution Circle
10*335
Flange Type
Plain Flange
Ratio
3.15~6.17
Applicable Bus
7m Bus
Wheel Hub Type
Bearing Unit
Weight(oil included)(kg)
690()Drum)/630(Disc)

Different parts of the drive shaft

The driveshaft is the flexible rod that transmits torque between the transmission and the differential. The term drive shaft may also refer to a cardan shaft, a transmission shaft or a propeller shaft. Parts of the drive shaft are varied and include:
The driveshaft is a flexible rod that transmits torque from the transmission to the differential

When the driveshaft in your car starts to fail, you should seek professional help as soon as possible to fix the problem. A damaged driveshaft can often be heard. This noise sounds like “tak tak” and is usually more pronounced during sharp turns. However, if you can’t hear the noise while driving, you can check the condition of the car yourself.
The drive shaft is an important part of the automobile transmission system. It transfers torque from the transmission to the differential, which then transfers it to the wheels. The system is complex, but still critical to the proper functioning of the car. It is the flexible rod that connects all other parts of the drivetrain. The driveshaft is the most important part of the drivetrain, and understanding its function will make it easier for you to properly maintain your car.
Driveshafts are used in different vehicles, including front-wheel drive, four-wheel drive, and front-engine rear-wheel drive. Drive shafts are also used in motorcycles, locomotives and ships. Common front-engine, rear-wheel drive vehicle configurations are shown below. The type of tube used depends on the size, speed and strength of the drive shaft.
The output shaft is also supported by the output link, which has two identical supports. The upper part of the drive module supports a large tapered roller bearing, while the opposite flange end is supported by a parallel roller bearing. This ensures that the torque transfer between the differentials is efficient. If you want to learn more about car differentials, read this article.
air-compressor

It is also known as cardan shaft, propeller shaft or drive shaft

A propshaft or propshaft is a mechanical component that transmits rotation or torque from an engine or transmission to the front or rear wheels of a vehicle. Because the axes are not directly connected to each other, it must allow relative motion. Because of its role in propelling the vehicle, it is important to understand the components of the driveshaft. Here are some common types.
Isokinetic Joint: This type of joint guarantees that the output speed is the same as the input speed. To achieve this, it must be mounted back-to-back on a plane that bisects the drive angle. Then mount the two gimbal joints back-to-back and adjust their relative positions so that the velocity changes at one joint are offset by the other joint.
Driveshaft: The driveshaft is the transverse shaft that transmits power to the front wheels. Driveshaft: The driveshaft connects the rear differential to the transmission. The shaft is part of a drive shaft assembly that includes a drive shaft, a slip joint, and a universal joint. This shaft provides rotational torque to the drive shaft.
Dual Cardan Joints: This type of driveshaft uses two cardan joints mounted back-to-back. The center yoke replaces the intermediate shaft. For the duplex universal joint to work properly, the angle between the input shaft and the output shaft must be equal. Once aligned, the two axes will operate as CV joints. An improved version of the dual gimbal is the Thompson coupling, which offers slightly more efficiency at the cost of added complexity.
air-compressor

It transmits torque at different angles between driveline components

A vehicle’s driveline consists of various components that transmit power from the engine to the wheels. This includes axles, propshafts, CV joints and differentials. Together, these components transmit torque at different angles between driveline components. A car’s powertrain can only function properly if all its components work in harmony. Without these components, power from the engine would stop at the transmission, which is not the case with a car.
The CV driveshaft design provides smoother operation at higher operating angles and extends differential and transfer case life. The assembly’s central pivot point intersects the joint angle and transmits smooth rotational power and surface speed through the drivetrain. In some cases, the C.V. “U” connector. Drive shafts are not the best choice because the joint angles of the “U” joints are often substantially unequal and can cause torsional vibration.
Driveshafts also have different names, including driveshafts. A car’s driveshaft transfers torque from the transmission to the differential, which is then distributed to other driveline components. A power take-off (PTO) shaft is similar to a prop shaft. They transmit mechanical power to connected components. They are critical to the performance of any car. If any of these components are damaged, the entire drivetrain will not function properly.
A car’s powertrain can be complex and difficult to maintain. Adding vibration to the drivetrain can cause premature wear and shorten overall life. This driveshaft tip focuses on driveshaft assembly, operation, and maintenance, and how to troubleshoot any problems that may arise. Adding proper solutions to pain points can extend the life of the driveshaft. If you’re in the market for a new or used car, be sure to read this article.

it consists of several parts

“It consists of several parts” is one of seven small prints. This word consists of 10 letters and is one of the hardest words to say. However, it can be explained simply by comparing it to a cow’s kidney. The cocoa bean has several parts, and the inside of the cocoa bean before bursting has distinct lines. This article will discuss the different parts of the cocoa bean and provide a fun way to learn more about the word.
air-compressor

Replacement is expensive

Replacing a car’s driveshaft can be an expensive affair, and it’s not the only part that needs servicing. A damaged drive shaft can also cause other problems. This is why getting estimates from different repair shops is essential. Often, a simple repair is cheaper than replacing the entire unit. Listed below are some tips for saving money when replacing a driveshaft. Listed below are some of the costs associated with repairs:
First, learn how to determine if your vehicle needs a driveshaft replacement. Damaged driveshaft components can cause intermittent or lack of power. Additionally, improperly installed or assembled driveshaft components can cause problems with the daily operation of the car. Whenever you suspect that your car needs a driveshaft repair, seek professional advice. A professional mechanic will have the knowledge and experience needed to properly solve the problem.
Second, know which parts need servicing. Check the u-joint bushing. They should be free of crumbs and not cracked. Also, check the center support bearing. If this part is damaged, the entire drive shaft needs to be replaced. Finally, know which parts to replace. The maintenance cost of the drive shaft is significantly lower than the maintenance cost. Finally, determine if the repaired driveshaft is suitable for your vehicle.
If you suspect your driveshaft needs service, make an appointment with a repair shop as soon as possible. If you are experiencing vibration and rough riding, driveshaft repairs may be the best way to prevent costly repairs in the future. Also, if your car is experiencing unusual noise and vibration, a driveshaft repair may be a quick and easy solution. If you don’t know how to diagnose a problem with your car, you can take it to a mechanic for an appointment and a quote.

China Bus Parts Rear Axle Half Shaft for Electric Motor Drive Axle     drive shaft coupler	China Bus Parts Rear Axle Half Shaft for Electric Motor Drive Axle     drive shaft coupler
editor by czh 2023-01-24

Best Cost made in China – replacement parts – PTO shaft manufacturer & factory Drive jeep tj driveshaft Gear Speed Reducer for Electric Motor with ce certificate top quality low price

We – EPG Group the biggest agricultural gearbox and pto factory in China with 5 diverse branches. For a lot more details: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

Best  Cost  made in China - replacement parts - PTO shaft manufacturer & factory Drive  jeep tj driveshaft Gear Speed Reducer for Electric Motor with ce certificate top quality low price

pto shafts on ebay Our custom push shaft cost manufacturing unit pto shaft suppliers in south africa has ninety eight honda crv travel shaft attained pto shaft max angle the 2005 chevy silverado 1500 push shaft certificate bmw e90 rear push shaft substitute of how to repair a pto shaft China’s continual velocity pto generate shaft Farm pto shaft adapter 1000 to 540 Machinery Merchandise Top quality Authentication promulgated by the Farm Equipment Products Quality Authentication Centre of China. EPG brand rotocultivator ploughshares in T. line were chosen as the Nationwide Rotary Tillage Equipment Market “Excellent Brand Items” in 2007 by Rotocultivator Department of China Agricultural Machinery Industry Affiliation.

 

Ever-energy expert in creating all types of mechanical transmission and hydraulic transmission like: planetary gearboxes, worm reducers, in-line helical equipment pace reducers, parallel shaft helical equipment reducers, helical bevel reducers, helical worm gear reducers, agricultural gearboxes, tractor gearboxes, car gearboxes, pto travel shafts, EPT reducer & connected gear factors and other related products, sprockets, hydraulic method, vaccum pumps, fluid coupling, equipment racks, chains, timing pulleys, udl pace variators, v pulleys, hydraulic cylinder, gear pumps, screw air compressors, shaft collars reduced backlash worm reducers and so on. additionally, we can produce personalized variators, geared motors, electric motors and other hydraulic products according to customers’ drawings.
The organization offers a reliable gurantee for the product’ s top quality by sophisticated inspection and screening products. professional complex group, exquisite processing technology and rigid control technique. 
In current years, the organization has been building quickly by its rich knowledge in manufacturing, adcanced managem EPT system, stHangZhourdized administration system, strong specialized drive. We usually adhere the concept of survial by high quality, and decelopment by innovation in science and engineering. 
Ever-power Team is ready to perform with you hand in hand and create brilliance with each other! 

 

Mini cycloidal gear motor
Thorough Solution Description

Mini cycloidal gear motor
one.smaller product
2.more compact electricity
3.greater ratio
4.ISO900:2000&CE

Mini cycloidal gea motor

one. Equipment motor have big ratio of deceleration, higher effectiveness.

two.The ratio of gear motor’s deceleration in single-phase is 9-87, in double phase 121-1894, in triple-stage the mechanical
effectiveness of ratio achieve 80%.

three.gear mtor making use of the planetary driving framework and the input shaft and output shaft on the 1 axis.

four.Geat motor making use of rolling bearing for making contact with and substantial-carbonate crsteel(GCr15) hardened by warmth treatment method and with a hardness
up to HRC58-sixty two for the main parts.

five.Apart from all equipment motor’s attributes the ordinary decelerators have, this collection decelerator also functions currently being not simple to
oil leak thanks to the use of grease for lubrication and able to be mounted in any directions to satisfy with the needs of the
users.

 

Part No.: 2841325710E
Type: Y2E1 132 S-four
Power: 5.5 (kW)
Poles: 4
Mounting: B3
Voltage: 400/690V
Speed: 1400 min-1

 

 

 

Best  Cost  made in China - replacement parts - PTO shaft manufacturer & factory Drive  jeep tj driveshaft Gear Speed Reducer for Electric Motor with ce certificate top quality low price

Motor made in China – replacement parts – in Lodz Poland Generator Pump Gear Coupling for Afc Conveyor with ce certificate top quality low price

Motor  made in China - replacement parts -  in Lodz Poland  Generator Pump Gear Coupling for Afc Conveyor with ce certificate top quality low price

We – EPG Team the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 different branches. For more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

 

Name B-65 Nylon Sleeve pump Equipment Tooth Coupling
Materials MC Nylon/PA66/POM/ PU/ UHMW-PE/Teflon/ PVDF/ PPS/PEEK/PSU and many others. As your like.
Colour Organic,White,Black,Inexperienced,Blue,Yellow,as your requirement
Diameter ten-500mm,or personalized
Density 1.2g/cm2
Condition In inventory/Made to purchase
Price Manufacturing facility value supplied
OEM/ODM Customers supply layout or picture or we develop layout according to customers’ demands.
Condition Sheet, rod, tube, gear, pulley, guidebook rail, and so on

Applications:
Mainly used in the mining, metallurgical, cement, chemicals, development, building materials,
Electric power, telecommunications, textiles, and transportation departments.
Such as:
1. EPT Belt conveyor, AFC conveyor, chain conveyor, screw conveyor.
two. Pump: Water pump, oil pump, slush pump, and so forth.
3. Enthusiast:Draft fan,admirer,boil fan,and so on.
4. Excavator: Bucket excavator, bucket wheel excavators, bucket wheel stacker reclaimer.
five. Crane: Tower crane, gantry crane, bridge crane.
6. Other people: Various elevators, coal plough, ball mill, crusher, recreation machine.
seven. Blender equipment, centrifuge, washer, leather-making machine, machine for recreation
  park mixer wire drawing machine. Extruder, and dregs crusher of boiler.
8. Plastic feeder, rubber smelling machine, and many others.

Workshop

EPT goods

 About us
HangZhou HangZhouANG Gear Co., Ltd. With a historical past of more than 20 years, is specialised in generating sprocket, equipment, coupling, taper bush and EPT transmission items. 

The business was launched in 1993 and at present employs much more than a hundred individuals. It covers an region of 18, 000 sq. meters, with more than 250 sets of a variety of kinds of metal processing tools, like ninety sets of CNC tools. 

We undertake the subsequent standard to produce our items: ISO 606 ANSIB 29.1 DIN 1801 GB 124-ninety seven. 

Our goods are exported to a lot more than sixty nations and locations, such as U. S. A, Japan, Germany, Italy, Argentina, South Africa. 

Sprocket is our main products for exporting. We can provide you numerous sorts of sprocket, Pitch measurement from 1/4″ to 4″ and teeth No. From 8 to a hundred and fifty. 

We usually offer you our clients aggressive price, excellent good quality and prompt supply. We usually contemplate customer’ S demands initial. Our intention is: “Customer’ S pleasure is our pursuit”. 

We sincerely hope to set up prolonged-expression organization relations with every single customized on the basis mutual advantages and friendship.

The use of authentic products manufacturer’s (OEM) component figures or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our company and the shown substitution parts contained herein are not sponsored, approved, or manufactured by the OEM.

Motor  made in China - replacement parts -  in Lodz Poland  Generator Pump Gear Coupling for Afc Conveyor with ce certificate top quality low price

Motor  made in China - replacement parts -  in Lodz Poland  Generator Pump Gear Coupling for Afc Conveyor with ce certificate top quality low price

Motor  made in China - replacement parts -  in Lodz Poland  Generator Pump Gear Coupling for Afc Conveyor with ce certificate top quality low price