Tag Archives: gear worm

China China Supply High Quality IY Series Worm Gear Hydraulic Slewing Drive with Best Sales

Applicable Industries: development engineering
Weight (KG): 280
Gearing Arrangement: Planetary
Output Torque: 23000
Input Velocity: 3000, 1500, 1000, 750 RPM or OEM
Output Velocity: -one hundred rpm
Product Name: IYJ Sequence Hydraulic Planetary Gearbox
Input: Hydraulic Motor/Motor Adapter
Output: Strong Shaft, Hollow Shaft
Set up Kind: Horizontal or Vertical Mounting
Shaft Place: Inline,Parallel,Appropriate Angle
MOQ: 1
Warranty: 1 calendar year
OEM: Settle for
Acknowledge: Customer Configurations
Coloration: OEM or Customer’s Ask for
Packaging Particulars: standard seaworthy packing ideal for extended-length transportation.
Port: HangZhou, ZheJiang

About Us
Major Products
Item Software

  • Define drawing of 50 ton hydraulic mooring winch
  • Specification (can be revised to fulfill customer’s specific requirements.)
  • About Firm
    Our Services1. 1 yr warranty from supply
    two. Free of charge components for substitution within guarantee period
    three. Expert resolution supplier
    four. Totally free technical assist at any time
    five. Buyer training is offered.
    6. On-web site installation and commissioning is
    FAQQ1: What’s your MOQ?
    Solution: 1 piece.

    Q2: What information must I offer to you just before you could advise a suitable winch and quotation for me?
    Solution: In purchase to advise a most suitable design to satisfy every single customer’s certain require, we need to know:

  • Meant application of the winch (including working issue)
  • line pull (t)
  • line speed (m/min)
  • drum ability/rope length (m)
  • rope diameter ( if have)
  • hydraulic method stress and pump stream ( if have)
  • other unique demands
  • How to tell if your driveshaft needs replacing

    What is the cause of the unbalanced drive shaft? Unstable U-joint? Your car may make clicking noises while driving. If you can hear it from both sides, it might be time to hand it over to the mechanic. If you’re not sure, read on to learn more. Fortunately, there are many ways to tell if your driveshaft needs replacing.

    unbalanced

    An unbalanced driveshaft can be the source of strange noises and vibrations in your vehicle. To fix this problem, you should contact a professional. You can try a number of things to fix it, including welding and adjusting the weight. The following are the most common methods. In addition to the methods above, you can use standardized weights to balance the driveshaft. These standardized weights are attached to the shaft by welders.
    An unbalanced drive shaft typically produces lateral vibrations per revolution. This type of vibration is usually caused by a damaged shaft, missing counterweights, or a foreign object stuck on the drive shaft. On the other hand, torsional vibrations occur twice per revolution, and they are caused by shaft phase shifts. Finally, critical speed vibration occurs when the RPM of the drive shaft exceeds its rated capacity. If you suspect a driveshaft problem, check the following:
    Manually adjusting the imbalance of a drive shaft is not the easiest task. To avoid the difficulty of manual balancing, you can choose to use standardized weights. These weights are fixed on the outer circumference of the drive shaft. The operator can manually position the weight on the shaft with special tools, or use a robot. However, manual balancers have many disadvantages.
    air-compressor

    unstable

    When the angular velocity of the output shaft is not constant, it is unstable. The angular velocity of the output shaft is 0.004 at ph = 29.5 and 1.9 at t = 1.9. The angular velocity of the intermediate shaft is not a problem. But when it’s unstable, the torque applied to it is too much for the machine. It might be a good idea to check the tension on the shaft.
    An unstable drive shaft can cause a lot of noise and mechanical vibration. It can lead to premature shaft fatigue failure. CZPT studies the effect of shaft vibration on the rotor bearing system. They investigated the effect of flex coupling misalignment on the vibration of the rotor bearing system. They assume that the vibrational response has two components: x and y. However, this approach has limited application in many situations.
    Experimental results show that the presence of cracks in the output shaft may mask the unbalanced excitation characteristics. For example, the presence of superharmonic peaks on the spectrum is characteristic of cracks. The presence of cracks in the output shaft masks unbalanced excitation characteristics that cannot be detected in the transient response of the input shaft. Figure 8 shows that the frequency of the rotor increases at critical speed and decreases as the shaft passes the natural frequency.

    Unreliable

    If you’re having trouble driving your car, chances are you’ve run into an unreliable driveshaft. This type of drivetrain can cause the wheels to stick or not turn at all, and also limit the overall control of the car. Whatever the reason, these issues should be resolved as soon as possible. Here are some symptoms to look for when diagnosing a driveshaft fault. Let’s take a closer look.
    The first symptom you may notice is an unreliable drive shaft. You may feel vibrations, or hear noises under the vehicle. Depending on the cause, it could be a broken joint or a broken shaft. The good news is that driveshaft repairs are generally relatively inexpensive and take less time than a complete drivetrain replacement. If you’re not sure what to do, CZPT has a guide to replacing the U-connector.
    One of the most common signs of an unreliable driveshaft is clanging and vibration. These sounds can be caused by worn bushings, loose U-joints, or damaged center bearings. This can cause severe vibration and noise. You can also feel these vibrations through the steering wheel or the floor. An unreliable driveshaft is a symptom of a bigger problem.
    air-compressor

    Unreliable U-joints

    A car with an unreliable U-joint on the drive shaft can be dangerous. A bad u-joint can prevent the vehicle from driving properly and may even cause you trouble. Unreliable u-joints are cheap to replace and you should try getting parts from quality manufacturers. Unreliable U-joints can cause the car to vibrate in the chassis or gear lever. This is a sure sign that your car has been neglected in maintenance.
    Replacing a U-joint is not a complicated task, but it requires special tools and a lot of elbow grease. If you don’t have the right tools, or you’re unfamiliar with mechanical terminology, it’s best to seek the help of a mechanic. A professional mechanic will be able to accurately assess the problem and propose an appropriate solution. But if you don’t feel confident enough, you can replace your own U-connector by following a few simple steps.
    To ensure the vehicle’s driveshaft is not damaged, check the U-joint for wear and lubrication. If the U-joint is worn, the metal parts are likely to rub against each other, causing wear. The sooner a problem is diagnosed, the faster it can be resolved. Also, the longer you wait, the more you lose on repairs.

    damaged drive shaft

    The driveshaft is the part of the vehicle that connects the wheels. If the driveshaft is damaged, the wheels may stop turning and the vehicle may slow down or stop moving completely. It bears the weight of the car itself as well as the load on the road. So even a slight bend or break in the drive shaft can have dire consequences. Even a piece of loose metal can become a lethal missile if dropped from a vehicle.
    If you hear a screeching noise or growl from your vehicle when shifting gears, your driveshaft may be damaged. When this happens, damage to the u-joint and excessive slack in the drive shaft can result. These conditions can further damage the drivetrain, including the front half. You should replace the driveshaft as soon as you notice any symptoms. After replacing the driveshaft, you can start looking for signs of wear.
    A knocking sound is a sign of damage to the drive shaft. If you hear this sound while driving, it may be due to worn couplings, damaged propshaft bearings, or damaged U-joints. In some cases, the knocking noise can even be caused by a damaged U-joint. When this happens, you may need to replace the entire driveshaft, requiring a new one.
    air-compressor

    Maintenance fees

    The cost of repairing a driveshaft varies widely, depending on the type and cause of the problem. A new driveshaft costs between $300 and $1,300, including labor. Repairing a damaged driveshaft can cost anywhere from $200 to $300, depending on the time required and the type of parts required. Symptoms of a damaged driveshaft include unresponsiveness, vibration, chassis noise and a stationary car.
    The first thing to consider when estimating the cost of repairing a driveshaft is the type of vehicle you have. Some vehicles have more than one, and the parts used to make them may not be compatible with other cars. Even if the same car has two driveshafts, the damaged ones will cost more. Fortunately, many auto repair shops offer free quotes to repair damaged driveshafts, but be aware that such work can be complicated and expensive.

    China China Supply High Quality IY Series Worm Gear Hydraulic Slewing Drive     with Best Sales China China Supply High Quality IY Series Worm Gear Hydraulic Slewing Drive     with Best Sales
    editor by czh

    China wholesaler 1224V Dc Motor 25Mm Shaft 50Rpm 100Rpm Brush Worm Gear Motor For Spreader near me factory

    itemvalueBrand NameKSTONEMOTORModel NumberKS-90WZYJ08 (200W~350W)CertificationsCE, ROHSContinuous Current(A)25 AEfficiencyIE 3Torque100~400 kg.cmVoltage12V 24V 36V 48VRated Speed40~250 rpmPower200~350 W Specification Related Products Company Profile HangZhoug Kstone Motor is a professional micro gear box manufacturer. The gear box included spur gear box, Planetary gear box, worm gears, Wheelchair motor. Kstone Motor has always been an excellent DC Gear Motors manufacturer.The motors are widely used for Automotive, Home appliances, Personal care, Powertools, Sell Well New Type Hollow Shaft Wp Gearbox Wpa Worm Gear Reducer Industry, and Intelligent products which provide healthy and convenient ways in life. Kstone Motor has a large number of production equipment, test equipment, gear processing equipment imported from Japan and Switzerland. Buyer Comments Packing & Delivery 1. 4PCS/Carton 2 Gross weight : 20 KG/Carton FAQ Q: Are you trading company or manufacturer?A: We are factory.Q: How to order?A: send us inquiry → receive our quotation → negotiate details → confirm the sample → Newest window pulley plastic steel door and window pulley for pvc door and window accessories sign contract/deposit → mass production → cargo ready → balance/delivery → further cooperationQ: How about Sample order?A: Sample is available for you. please contact us for details.Q: Which shipping way is available?A: DHL, FedEx, By Sea are available. The other shipping ways are also available, please contact us if you need ship by the other shipping way. Q: How long is the deliver, Wholesale Universal Joint Bearing Automobile Agricultural Machinery Drive Shaft Small Cross Shaftuniversal Joint producing and shipping?A: Deliver time depends on the quantity you order. usually it takes 15-25 working days.Q: How to confirm the payment?A: We accept payment by T/T, PayPal, the other payment ways also could be accepted, Please contact us before you pay by the other payment ways. Also 50% deposit is available, the balance money should be paid before shipping.Q: What is your terms of payment?A: Payment=20000USD, Top SALES Factory CHINESE CAR AUTO SPARE PARTS Transmission GREAT WALL WINGLE 2.8TC GEARBOX For Wingle 50% T/T in advance ,balance before shipment.If you have another question, please feel free to contact us.

    What Is a Worm Gear Reducer?

    If you have never seen a worm gear reducer before, you’re missing out! Learn more about these incredible gears and their applications by reading this article! In addition to worm gear reducers, learn about worms and how they’re made. You’ll also discover what types of machines can benefit from worm gears, such as rock crushers and elevators. The following information will help you understand what a worm gear reducer is and how to find one in your area.
    worm shaft

    Typical worm shaft

    A typical worm has two shafts, one for advancing and one for receding, which form the axial pitch of the gear. Usually, there are eight standard axial pitches, which establish a basic dimension for worm production and inspection. The axial pitch of the worm equals the circular pitch of the gear in the central plane and the master lead cam’s radial pitch. A single set of change gears and one master lead cam are used to produce each size of worm.
    Worm gear is commonly used to manufacture a worm shaft. It is a reliable and efficient gear reduction system that does not move when the power is removed. Typical worm gears come in standard sizes as well as assisted systems. Manufacturers can be found online. Listed below are some common materials for worm gears. There are also many options for lubrication. The worm gear is typically made from case hardened steel or bronze. Non-metallic materials are also used in light-duty applications.
    A self-locking worm gear prevents the worm from moving backwards. Typical worm gears are generally self-locking when the lead angle is less than 11 degrees. However, this feature can be detrimental to systems that require reverse sensitivity. If the lead angle is less than four degrees, back-driving is unlikely. However, if fail-safe protection is a prerequisite, back-driving worm gears must have a positive brake to avoid reverse movement.
    Worm gears are often used in transmission applications. They are a more efficient way to reduce the speed of a machine compared to conventional gear sets. Their reduced speed is possible thanks to their low ratio and few components. Unlike conventional gear sets, worm gears require less maintenance and lower mechanical failure than a conventional gear set. While they require fewer parts, worm gears are also more durable than conventional gear sets.
    There are two types of worm tooth forms. Convex and involute helicoids have different types of teeth. The former uses a straight line to intersect the involute worm generating line. The latter, on the other hand, uses a trapezoid based on the central cross section of the root. Both of these tooth forms are used in the production of worms. And they have various variations in pitch diameter.
    worm shaft

    Types of worms

    Worms have several forms of tooth. For convenience in production, a trapezoid-based tooth form is used. Other forms include an involute helicoidal or a convolute worm generating a line. The following is a description of each type. All types are similar, and some may be preferred over others. Listed below are the three most common worm shaft types. Each type has its own advantages and disadvantages.
    Discrete versus parallel axis: The design of a worm gear determines its ratio of torque. It’s a combination of two different metals – one for the worm and one for the wheel – which helps it absorb shock loads. Construction equipment and off-road vehicles typically require varying torques to maneuver over different terrain. A worm gear system can help them maneuver over uneven terrain without causing excessive wear.
    Worm gear units have the highest ratio. The sliding action of the worm shaft results in a high self-locking torque. Depending on the angle of inclination and friction, a worm gear can reach up to 100:1! Worm gears can be made of different materials depending on their inclination and friction angle. Worm gears are also useful for gear reduction applications, such as lubrication or grinding. However, you should consider that heavier gears tend to be harder to reverse than lighter ones.
    Metal alloy: Stainless steel, brass, and aluminum bronze are common materials for worm gears. All three types have unique advantages. A bronze worm gear is typically composed of a combination of copper, zinc, and tin. A bronze shaft is more corrosive than a brass one, but it is a durable and corrosion-resistant option. Metal alloys: These materials are used for both the worm wheel.
    The efficiency of worm gears depends on the assembly conditions and the lubricant. A 30:1 ratio reduces the efficiency to 81:1%. A worm gear is more efficient at higher ratios than an helical gear, but a 30:1 ratio reduces the efficiency to 81%. A helical gear reduces speed while preserving torque to around 15% of the original speed. The difference in efficiency between worm gear and helical gear is about half an hour!

    Methods of manufacturing worm shafts

    Several methods of manufacturing worm shafts are available in the market. Single-pointed lathe tools or end mills are the most popular methods for manufacturing worms. These tools are capable of producing worms with different pressure angles depending on their diameter, the depth of thread, and the grinding wheel’s diameter. The diagram below shows how different pressure angles influence the profile of worms manufactured using different cutting tools.
    The method for making worm shafts involves the process of establishing the proper outer diameter of a common worm shaft blank. This may include considering the number of reduction ratios in a family, the distance between the worm shaft and the gear set center, as well as the torques involved. These processes are also referred to as ‘thread assembly’. Each process can be further refined if the desired axial pitch can be achieved.
    The axial pitch of a worm must match the circular pitch of the larger gear. This is called the pitch. The pitch diameter and axial pitch must be equal. Worms can be left-handed or right-handed. The lead, which refers to the distance a point on the thread travels during one revolution of the worm, is defined by its angle of tangent to the helix on the pitch of the cylinder.
    Worm shafts are commonly manufactured using a worm gear. Worm gears can be used in different applications because they offer fine adjustment and high gear reduction. They can be made in both standard sizes and assisted systems. Worm shaft manufacturers can be found online. Alternatively, you can contact a manufacturer directly to get your worm gears manufactured. The process will take only a few minutes. If you are looking for a manufacturer of worm gears, you can browse a directory.
    Worm gears are made with hardened metal. The worm wheel and gear are yellow in color. A compounded oil with rust and oxidation inhibitors is also used to make worm gears. These oils adhere to the shaft walls and make a protective barrier between the surfaces. If the compounded oil is applied correctly, the worm gear will reduce the noise in a motor, resulting in a smoother performance.
    worm shaft

    applications for worm gear reducers

    Worm gears are widely used in power transmission applications, providing a compact, high reduction, low-speed drive. To determine the torque ratio of worm gears, a numerical model was developed that makes use of the equation of displacement compatibility and the influence coefficient method, which provides fast computing. The numerical model also incorporates bending deflections of the gear surfaces and the mating surfaces. It is based on the Boussinesq theory, which calculates local contact deformations.
    Worm gears can be designed to be right or left-handed, and the worm can turn either clockwise or counter-clockwise. An internal helical gear requires the same hand to operate both parts. In contrast, an external helical gear must be operated by the opposite hand. The same principle applies to worm gears in other applications. The torque and power transferred can be large, but worm gears are able to cope with large reductions in both directions.
    Worm gears are extremely useful in industrial machinery designs. They reduce noise levels, save space, and give machines extra precision and fast-stopping capabilities. Worm gears are also available in compact versions, making them ideal for hoisting applications. This type of gear reducer is used in industrial settings where space is an issue. Its smaller size and less noise makes it ideal for applications that need the machine to stop quickly.
    A double-throated worm gear offers the highest load capacity while still remaining compact. The double-throated version features concave teeth on both worm and gear, doubling the contact area between them. Worm gears are also useful for low to moderate-horsepower applications, and their high ratios, high output torque, and significant speed reduction make them a desirable choice for many applications. Worm gears are also quieter than other types of gears, reducing the noise and vibrations that they cause.
    Worm gears have numerous advantages over other types of gears. They have high levels of conformity and can be classified as a screw pair within a lower-pair gear family. Worm gears are also known to have a high degree of relative sliding. Worm gears are often made of hardened steel or phosphor-bronze, which provides good surface finish and rigid positioning. Worm gears are lubricated with special lubricants that contain surface-active additives. Worm gear lubrication is a mixed lubrication process and causes mild wear and tear.

    China wholesaler 1224V Dc Motor 25Mm Shaft 50Rpm 100Rpm Brush Worm Gear Motor For Spreader  near me factory China wholesaler 1224V Dc Motor 25Mm Shaft 50Rpm 100Rpm Brush Worm Gear Motor For Spreader  near me factory

    Best China manufacturer & factory aluminium alloy nmrv reducer series rc gearbox worm gear gearbox With high quality best price

    Best China manufacturer & factory aluminium alloy nmrv reducer series rc gearbox worm gear gearbox With high quality best price

    EPG has been successfully certified by ISO9002 Quality Management System, ISO9001 Quality Management System, API certificate, ISO/TS16949:2002 and ISO10012 measurement management system.

    Overview

    Quick Details

    Applicable Industries:

    Manufacturing Plant

    Place of Origin:Zhejiang, China
    Brand Name:

    OEM

    ITEM NO:

    SYF

    Model Number:

    NMRV

    Product Keywords:

    factory direct sales nrv-vs speed reducer

    Product name:

    Motor Reductor

    Color:

    Blue

    Material:

    Aluminium Alloy

    Certificate:

    ISO9001

    Application:

    Mining Plant

    Ratio:

    5-100

    Bearing:

    NSK

    Supply Ability

    Cat 3 Point Hitch How do I operate the PTO on my tractor? Prior to running the PTO, you will need your tractor to reach the starting RPM (revolutions per minute). Once the starting RPM has been reached you can begin operating the PTO. Supply Ability:
    1000 Piece/Pieces per Month

    Packaging & Delivery

    Packaging Details
    wooden box
    Port
    Shanghai

    Online Customization

    Mounting Dimension

    The products are widely applied in the producing equipments of all kinds of industries inside and outside China. They are the best choices for nowadays modern facilities of mechanical reducing drive control to realize large twisting distance, large gear ratio, little noise, high efficiency and stability.

    Model:

    NMRV025, 030, 040, 050, 063, 075, 090, 110, 130, 150

    Ratio:

    1:5,7.5,10,15,20,25,30,40,50,60,80,100

    Color:

    Blue, Silver Or On Customer Request

    Noise:

    low noise (<50DB)

    Advantage:

    Efficient and safe operating

    Material:

    Housing: Die-Cast Aluminum Alloy

    Worm Gear-Bronze 9-4#

    Worm-20CrMnTi with carburizing and quenching, surface harness is 56-62HRC

    Shaft-chromium steel-45#

    Packing:

    Carton and Wooden Case

    Bearing:

    C&U Bearing

    Seal:                      

    NAK SKF

    Certificate:

    ISO9001,CE,3C,OEM

    Warranty:

    12 months

    Input Power:   

    0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw       

    Usages:

    Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,

    Woodworking,Glass.

    IEC Flange:

    56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5

    Lubricant:

    Synthetic & Mineral

    Click here for more discounts

    Single Step Worm Gear Reducer.

    The reducer which model is 25~90 made of Aluminum alloy die-casting box,good looking in appearance,compact in structure,rust proofing on surface and small volume to save mounting space.
    The reducer model of 110~150 is made of cast iron which casted with Aluminum mould.It`s good looking an”EPG” brand rotocultivator ploughshares in T.S. total lines produced in our factory have been tested and appraised by the Ministry of Agriculture and have obtained the license of popularizing farm machinery promulgated by the Ministry of Agriculture of the People’s Republic of China. d solid, and can be used through the setting of multi-azimuth.
    Good radiating characterstic leads safe and reliability,and high efficiency for using.
    The strong capacity of loading ensure stable transmission,make less vibration and noise.
    Varies of connecting structure for power input and torque output meet different require-merits;the design of box outline and the set of foot hole with good versality is apt to many kinds of mounting.

    The NMRV worm gearbox is new generation of products by our factory on the basis of perfecting WJ series products with compromise of advanced technology both at home and abroad.It’s apprearance adopts advanced square box structure.It’s outer body is made of high quality aluminium alloy die casting into forming.It’s small in volume,light weight,high in radiating efficiency,large in output torque,smooth in running and low noise.It’s suitbale for all positions.

    Method for model chosen

    PleThe lubrication of this gear reducer type is constant and comes as standard, with high quality refined oil which has antirust and antiwear products with Fe, Cu and alloy protectors that has CLP DIN 51517-3, FGZ level 12, AP GL-4, US 224, AGMA 250-04 level of quality; for that reason its maintenance is not needed.ase understand the following at first in order to delect the model of RV speed reducer properly.

    – Loading condition
     – Speed scope or ratio in application
    – Working condition and environment
    – Installation space

    Related product

    Company Profile

    Packing & Delivery

    Best China manufacturer & factory aluminium alloy nmrv reducer series rc gearbox worm gear gearbox With high quality best price

    Best China manufacturer & factory aluminium alloy nmrv reducer series rc gearbox worm gear gearbox With high quality best price

    Best China manufacturer & factory aluminium alloy nmrv reducer series rc gearbox worm gear gearbox With high quality best price

    Best China manufacturer & factory Efficient worm 110 warm reducer 22kw gear box 160 With high quality best price

    Best China manufacturer & factory Efficient worm 110 warm reducer 22kw gear box 160 With high quality best price

    EPG is one of the biggest manufacturers in China. We have advanced machines for production and new technology testing ability . Through adopting new technology from British, German, U.S.A, our products are best sellers all over European, America, and Southeast Asia.

    Overview

    Quick Details

    Applicable Industries:

    Construction works

    Brand Name:

    OEM

    Gearing Arrangement:

    worm

    Output Torque:

    15~1700Nm

    Input Speed:

    500~2800/min

    Output Speed:

    5~560/min

    Product name:

    worm 110 warm reducer 22kw gear box 160

    Application:

    Food Stuff, Ceramics, Chemical, Packing, Dyeing,Wood working, Glass.

    Color:

    Blue(RAL5010)/Silver grey (RAL9022) Or On Request

    Ratio:

    5,7.5,10,15,20,25,30,40,50,60,80,100.

    Warranty:

    1 Year

    Supply Ability

    Supply Ability:
    36000 Piece/Pieces per Month

    Packaging & Delivery

    Packaging Details
    Transparent box packaging, or color box packaging, it also can be customized.
    Port
    Ningbo/Shanghai

    Online Customization

    Product Expertise EPG have for decades supplied quality products into high integrity industries. With an unparalleled knowledge of applications and processes across multiple industries. EPG application engineers have the experience to specify the right product for your needs.

    Efficient worm 110 warm reducer 22kw gear box 160

     

    Efficient worm 110 warm reducer 22kw gear box 160

     

     

     

    Efficient worm 110 warm reducer 22kw gear box 160

     

    Efficient worm 110 warm reducer 22kw gear box 160

     

    Efficient worm 110 warm reducer 22kw gear box 160

     

    Efficient worm 110 warm reducer 22kw gear box 160

     

     

     

    Efficient worm 110 warm reducer 22kw gear box 160

     

     

    Efficient worm 110 warm reducer 22kw gear box 160

     

     

     Efficient worm 110 warm reducer 22kw gear box 160

     

     

     Efficient worm 110 warm reducer 22kw gear box 160

     

     

     Efficient worm 110 warm reducer 22kw gear box 160

     

    Q1.How to choose a gear box 160 which meets our requirement?
    A1: You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
           the technical information of output torque, output speed and motor parameter etc.

     

    Q2.How is your price? Can you offer any discount?
    A2: We will give the best price we can base on your needs and the quantities.

     

    Q3.Do you offer any visiting?
    A3: Yes! We sincerely invite you to visit us! We can pick you from airport, railway station and so on.
           AlThe star tube is suitable for applications with high torque peaks that could be harmful to the other tube shapes. The star tube with 6 contact points is also the preferred choice when transmissions exceed 1600mm in length and when the speed is 1000 rpm. AG series with splined tube The splined tube is suggested for very short PTO shafts. The splined telescopic shaft allows bushing and splined couplings of only 100-120mm. The dimensions of the cross joints vary from 22mm diameter up to 48mm diameter and allow power transmission of up to 250HP.so, we can arrange housing for you. Please let us know in advanced.

     

    Q4.When is the best time to contact you?
    A4: You can contact us by email any time, we will reply you as soon as possible.

     

    Q5.How long will it take foOur factory has obtained the certificate of China’s Farm Machinery Products Quality Authentication promulgated by the Farm Machinery Products Quality Authentication Centre of China. r the lead time?
    A5: For our standard model, please refer to the different product pages to check the lead time.
          For the OEM/ODM products, please contact us for further information.

     

     

    Efficient worm 110 warm reducer 22kw gear box 160

    Best China manufacturer & factory Efficient worm 110 warm reducer 22kw gear box 160 With high quality best price

    Best China manufacturer & factory Efficient worm 110 warm reducer 22kw gear box 160 With high quality best price

    Best China manufacturer & factory Efficient worm 110 warm reducer 22kw gear box 160 With high quality best price

    high Manufacturers & Suppliers quality copper nut head type worm gear screw jack for lifting screw jack supplier

    high  Manufacturers & Suppliers quality copper nut  head type  worm gear screw jack for lifting screw jack  supplier

    Getting amassed treasured experience in cooperating with overseas consumers, a specialized provider of a total range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….

    Overview

    Quick Particulars

    Applicable Industries:

    Producing Plant

    Color:

    Customer Ask for

    Application:

    Machine Tool

    Packing:

    Wood Box

    Ratio:

    P/M

    Mounting Situation:

    screw

    Certificate:

    ISO9001

    Substance:

    Metal

    Guarantee:

    1 Yr

    Enter Sort:

    Shaft Enter

    Fat:

    3.five-90kg

    Packaging & Shipping

    Direct Time
    :
    Quantity(Bags) 1 – one two – five >5
    Est. Time(days) five 12 To be negotiated

    Online Customization

    Introduction

    Screw worm jack reducer

            SWL sequence worm wheel screw elevator is a fundamental lifting elements, in line with JB/T8809 — 2010 (unique JB/T8809 — 1998, JB/ZQ4391 — 86) standards. Carrying capability two.five — 120T. It has the rewards of compact structure, tiny volume, mild weight, extensive electricity source, minimal sound, handy installation, flexible use, several features, numerous supporting forms, large reliability and extended services existence.

             SWL sequence worm screw is a sort of standard lifting tools, which is extensively used in equipment, metallurgy, chemical industry, medicine, building, h2o conservancy, tradition and other industries.

    Structural type

    Type 1 – the screw moves in equally rotation and axial route.

    Kind two – the screw rotates. The nut on the screw moves in an axial route.

    Assembly variety

    Type A – screw (or nut) moves upward

    Type B – screw (or nut) moves downward

    Transmission ratio

    Common (P) 

     slow (M)

    Product of screw elevator

    SWL2.5,SWL5,SWL10,SWL15,SWL20,SWL25,SWL35,SWL50,JWM002,JWM005,JWM010,JWM025,JWM050,JWM100,JWM150,JWM200,JWM300,JWM500,JWM750,JWM1000

    Feature One

    JWM (trapezoidal screw type) is ideal for minimal pace and lower frequency purposes.

    Attribute Two

    Affordable value, compact construction, easy operation and practical maintenance

    Feature A few

    Lower velocity, low frequency: mainly utilized for large load, lower velocity and no regular work spot

    Relevant Goods

    Our Organization

    Certifications

    Packing & Supply

    FAQ

    Q1: Are you a buying and selling organization or a company ?
    A: We are a maker in ZJ Province, China. Our firm owns
    the capability of production, processing, creating and R&D. We welcome your visit.

    Q2: How we decide on designs and requirements?
    A: In accordance to the certain particulars of the requires from the element of enquiry,
    we will advise the products’ models on synthesizing the elements of
    field of products usage, energy, torque arm and ratio…

    Q3: How is your price tag? Can you offer you any low cost?
    A: Our costs are often aggressive. If the buyer can area a huge purchase,
    we surely will let low cost.

    This autumn: How lengthy ought to I wait around for the opinions following I send the enquiry?
    A: We will reply as quickly as attainable, twelve several hours at most.

    Q5: What is your item warranty period?
    A: We have the certifications of ISO9001,CE, SGS.

    Q6: What industries are your gearboxes currently being utilised?
    A: Our gearboxes are widely applied to metallurgical products, mining
    gear, automation tools, foods equipment, packaging equipment,
    tobacco equipment and so on.

    wp China series reducer small reduction gearbox worm gear reducers gearbox 20 ratio reduction industrial speed transmission – Supplier Manufacturer wholesaler Factory

    wp  China series reducer small reduction gearbox worm gear reducers gearbox 20 ratio reduction industrial speed transmission - Supplier Manufacturer wholesaler Factory

    For far more information.: Mobile/Whatpp: +8613083988828

    Great consideration has been paid out on environmental security and strength saving. Below the guidance of managerial feeling of “Serving agriculture, scoring a achievement through top quality of goods and honesty in enterprise”, our goods have been trustworthy by clientele and have obtained a bigger share of market.

    Overview

    Swift Information

    Applicable Industries:

    Creating Substance Stores

    Gearing Arrangement:

    Worm

    Output Torque:

    2.6-1195N.M

    Enter Pace:

    1450 Rpm

    Output Velocity:

    fourteen-280r/min

    Area of Origin:Zhejiang, China
    Brand name Title:

    OEM

    Bearing:

    C&U Bearing

    Seal:

    NAK

    Housing Materials:

    Die-Cast Iron cast

    Gear materials:

    Cooper-ten-three#

    Installation Design:

    B3

    Coloration:

    Blue(RAL5010)/Silver Gray (RAL9022)

    Certification:

    ISO9001

    Warranty:

    1 12 months

    Key word:

    Gearbox WPA

    Provide Ability

    Provide Capability:
    1000 Set/Sets for every Month

    Packaging & Shipping and delivery

    Packaging Specifics
    carton or picket scenario for every established or based mostly on customer’s request.
    Port
    Shanghai/Ningbo Port
    Guide Time
    :
    Quantity(Containers) one – one >1
    Est. Time(days) 20 To be negotiated

    On the internet Customization

    wp sequence gearbox little reduction gearbox worm gear gearboxes gearbox twenty ratio reduction industrial velocity transmission

    Solution Description

     WP sequence gearbox, the worm is created of forty five# higher top quality steel following heat treatment method, the worm wheel is solid with tin bronze, the wear-resisting efficiency is great, specially on the bearing capability is far more clear, primarily relevant to plastic, metallurgy, beverage, mine, lifting transportation, chemical building and other mechanical tools speed reduction push.

    Features:

    1. Stable transmission, reduced vibration, impact and noise, large reduction ratio, broad flexibility and appropriate for use with various mechanical gear.

    two. Huge transmission ratio can be attained by single-phase transmission, with compact construction. Most gearboxes have good self-locking property, and can help save the brake unit for mechanical products with brake needs.

    three. The meshing friction loss between worm screw teeth and worm equipment surface is relatively big, so the transmission performance is lower than that of gear, and it is effortless to be heated and the temperature is greater.

    4. Increased needs for lubrication and cooling.

    Type: gearbox WPA
    Model: WPA forty-250
    Ratio: one:ten,15,twenty,twenty five,thirty,40,fifty,sixty
    Coloration: Blue/Silver Or On Client Ask for
    Substance: Housing: Die-Forged Iron solid
    Worm Equipment-Copper-10-three#
    Worm-20CrMn Ti with carburizing and quenching, floor harness is fifty six-62HRC
    Shaft-chromium metal-45#
    Packing: Carton and Wooden Scenario
    Bearing: C&U Bearing
    Seal:                       NAK SKF
    Guarantee: 1 Yr
    Input Electrical power:   

    .06KW,.09KW                                                                       

    Usages: Industrial Equipment: Food Things, Ceramics,CHEMICAL,Packing,Dyeing,
    Woodworking,Glass.

     

     

    IEC Flange:

    56B14, 63B14, 63B5, 63B5, 71B14,80B14 AND SO ON

    Lubricant: Artificial&Mineral

    Organization Info

     

    Certifications

     

    Our Companies

     

    Packaging & Shipping and delivery

     

    Expo& Consumers

     

    FAQ

    : Are you investing company or producer ?

    A: We are manufacturing unit.

    Q: How lengthy is your shipping time?

    A: Typically it is five-10 days if the items are in inventory. or it is fifteen-twenty days if the items are not in stock, it is in accordance to quantity.

    Q: Do you offer samples ? is it cost-free or further ?

    A: Yes, we could offer you the sample for free charge but do not shell out the cost of freight.

    Q: What is your terms of payment ?

    A: Payment=1000USD, 30% T/T in advance ,harmony just before shippment.
    If you have an additional question, pls come to feel totally free to contact us as beneath:

    Contact us

     

    EPG – one of the biggest transmission factory in China, major goods: worm geared motors, agricultrual gearbox, planetary gear drive, helical,screw, beve gears and spare components and agricultural elements manunfacuter in ChinaFor more details.: Cell/Whatpp: +8613083988828

    wp  China series reducer small reduction gearbox worm gear reducers gearbox 20 ratio reduction industrial speed transmission - Supplier Manufacturer wholesaler Factory