Product Description
What are the symptoms of a damaged half shaft?
The half shaft is the component that transmits power to the wheels. Without the half shaft, the power cannot be transmitted to the wheels. If the car’s half shaft is damaged, it will cause the car to vibrate abnormally when driving, and will also cause abnormal noises when the car is driving. If the drive shaft is damaged, it needs to be replaced immediately.
If there is a problem with the drive shaft when the vehicle is driving at high speed, it may cause the car tires to fall off or the wheel hub to become out of round. The wheel hub out of roundness will cause the car’s dynamic balance to become unbalanced, causing the car’s high-speed steering wheel to shake. In the vehicle’s transmission system, the half shaft plays an important role and is the shaft that connects the drive wheels and the differential. The inner tie rod ends are generally connected to each other through side gears and splines, and the outer tie rod ends are connected to the wheel hub and flange. The structure of the automobile drive wheel is determined by the structural form of the half shaft. According to the different stress conditions of the half shaft, it can be divided into semi-floating half shaft and fully floating half shaft. It can be seen that the automobile half shaft is the most important factor in the daily driving of the car. An important component, the safe driving of the car depends on the performance of the drive shaft. After long-term torsional fatigue and impact, automobile half shafts are prone to bending, breakage, twisting, skewing, and spline tooth wear. The fractures of automobile half shafts usually have the following morphological types: 1.The spiral of the half-shaft shaft is broken; 2. Mixed cracks and fractures appear in the half-shaft shaft; 3.The splines of the half-shaft are broken; 4.The half-shaft is blue Cracks appear on the disc, and may even fall off in severe cases; 5.Other morphological fractures and cracks in the half shaft.
Product description
HDAG oem -20 2-1 auto spare parts propeller half shaft cardan rear axle reinforced drive shaft for chevrolet niva vaz 2123 2121-21214
Item Name | Auto or car CV JOINT,Universal Joint,CV JOINT INNER OUTER, DRIVE SHAFT, DRIVESHAFT,CV AXLE, JOINT SHAFT ASSEMBLY,CV AXLE JOINT SHAFT, HALF SHAFT, WHEEL BEARING HUB, WHEEL HUB BEARING, WHEEL BEARING | |||||||||||||||||||
OEM/REF NO. | 2 2 2 2 2 2 2 -20 21213 -2203012-1 | |||||||||||||||||||
Car Model | For lada UAZ 2206/3151/3303/3741/9 3741 236571 3160 3163 NIVA VAZ samara moskvich 2141 Tavria 1102 GRANTA LARGUS Vesta X-Ray Kalina PRIORA BA3 Granta Kalina Priora OKA VESTA Gazelle Gazelle Gazel Gazon Kamaz Patriot | |||||||||||||||||||
POSITION | RH/LH/Right/ Left/ Front/Rear | |||||||||||||||||||
MOQ | 150PCS | |||||||||||||||||||
Quality/Product parameters | OEM standard or Design as sample or drawing | |||||||||||||||||||
Payment Terms | T/T, L/C, Credit card, Cash | |||||||||||||||||||
Product Guarantee | 1 Year or 50, TOYOTA : TOYOTA : TOYOTA : 4342 TOYOTA : 4342 TOYOTA : 4342R20 TOYOTA : 4346R30 TOYOTA : 4346S50 TOYOTA : 4346 TOYOTA : 4347S60 TOYOTA : 4347U90 TOYOTA : TOYOTA : TOYOTA : 434708Z033 TOYOTA : 434708Z037 |
NISSAN : 391J10 NISSAN : 391571JJ10 NISSAN : 39157117JJ10 NISSAN : 3910110JJ10 |
NISSAN : 391M615 NISSAN : 391Y10 NISSAN : 391M570 NISSAN : 391N215 NISSAN : 391571M311 NISSAN : 391571M915 NISSAN : 3910140Y10 NISSAN : 391014M570 NISSAN : 391014M575 NISSAN : 391014M771 NISSAN : 3910163Y10 NISSAN : 391016N215 |
MAZDA : G057155J210 NISSAN : 391J171 NISSAN : 391N275 NISSAN : 391J071 NISSAN : 391J915 NISSAN : 391E478 NISSAN : 391012J215 NISSAN : 391014N175 NISSAN : 391014N177 NISSAN : 391014N275 NISSAN : 391015J571 NISSAN : 391016J571 NISSAN : 391016J071 NISSAN : 391016J076 NISSAN : 391016J915 NISSAN : 39101AE415 NISSAN : 39101AU415 NISSAN : 39101AU416 NISSAN : 39101AW110 NISSAN : 39101CX116 NISSAN : 39101WF715 NISSAN : 39101WF716 |
391 | 391M10 TOYOTA : 4347Z035 TOYOTA : 434708Z039 |
374077/374078/374092/7837456/7839615/7837457 | 3920164Y10 | G564-25-5, 8D0498103, 8D0498103A,3B0498103,43145711H | 8D0498099A,8D 0571 15H,8D0498099C,8D 0571 15H | 43420-20380 | 3748103A | 86~88099 | 435711011 | 44105-78B VAG : |
6Q0498099E, 6Q0498099B, 6Q0498099EX | 43403-6, 96564144 ,96396134,512395 |
39211-3U | 39211-BM726 | FD50-25-40XA, FA60-25-40X, FA58-25-50X FA252560XA/FA557160X/FA5822510/FA5822510B/FD54-25-60XA/FD55-25-50XA |
1K0498103C | 8K0498099X,8K0498099,8K0498099D | 17145711 171498UU507 NISSAN : 391V70A NISSAN : 391013U505 NISSAN : 391014V01C NISSAN : 391014V51A NISSAN : 391014V70A NISSAN : 392113U 96348790 |
391 VOLVO : 8111304 VOLVO : 86011 VOLVO : 9122833 VOLVO : 9163595 |
7L 0571 11D,95534995712,95534995710, 7L0498099CX,7L0498099AX | 17145711J,171498099A | 374403/374403/9201725 | 39211-7F | 8K 0571 15C, 8K0498099B, 8K0498099BX | 171498099B,171498099BX | 96273760/96549104/96951692 | 392112F225 | MAZDA : G5712510 MAZDA : G571550X MAZDA : G571560X MAZDA : G565715 OPEL : 374 VAUXHALL : 571 |
391 MAZDA : MD1922510 MAZDA : MD1922510A MAZDA : MD192550X MAZDA : MD257160XB |
|||||||
44014-SP0- OPEL : 374048 OPEL : 374067 OPEL : 37408 OPEL : 374118 OPEL : 374148 OPEL : 374195 OPEL : 90125876 OPEL : 90157212 OPEL : 95718734 OPEL : 9317340 OPEL : 93173430 SAAB : 4242319 |
392114F425 | MD20-25-60X | ||||||||||||||||||
44305SE0J22/44306SE0G12/44305SE0G23/44305SE0G24/44305SE0J20 | A6383342334 | 391KD0A NISSAN : 391KD0A NISSAN : 391019Y015 NISSAN : 39101CNY015 NISSAN : 39211CNHN50 HONDA : 44305S04J60 HONDA : 44305S0A960 HONDA : 44305S0AN60 HONDA : 44305S2H571 HONDA : 44305S2H050 HONDA : 44305S2H950 HONDA : 44305S2H951 HONDA : 44305S2HN50 HONDA : 44305S5AJ50 HONDA : 44305S5AJ60 HONDA : 44305S5AJ61 HONDA : 44305S5AJ62 HONDA : 44305S5C950 HONDA : 44305S5CN50 HONDA : 44305S5CN51 HONDA : 44305S7B950 HONDA : 44305S7C950 HONDA : 44305SOA960 HONDA : 44305SOAN60 HONDA : 44306S0A960 HONDA : 44306S0AN60 HONDA : 44306S2H571 HONDA : 44306S2H950 HONDA : 44306S2H951 HONDA : 44306S5AJ51 HONDA : 44306S5AJ61 HONDA : 44306S5AJ62 HONDA : 44306S5C951 HONDA : 44306S5C952 HONDA : 44306S7B950 HONDA : 44306S7C950 HONDA : 44306SOA960 HONDA : 44306SOAN60 |
49591-1F410 | 44305-SA5-000,44305-688-000,44306-689-601,44306-688-571,44305-688-571 | 4401720,4401727,8200169277,8200169281,8200169285,8200169288,8200196277,8200178624 | 39210-Y02G0 326582 |
FG02-25-500D FG02-25-500E FG02-25-600D FG02-25-600E |
|||||||||||||
44014-SDC-A50,44014-SCA-E01,44014SDCA51, | 9565719/3273.17/3273.18/3273.20/3273.21/3273.23/3273.24/3274.79/3274.80 | 44305-SB2-750,44305-SF4-J21,44306-SK7-571 44305-SA2-960 |
825716110,7700111918,8200064731, | 39100ED005 39100ED00A 39101ED00A 39101ED005 |
GF09-25-50X,GP28-25-50XA/GD36-25-60X | |||||||||||||||
44014-SWE-T00,44014-SWE-T01,44014-SWA-000,44014-SWA-571,44014-SXS-A00 | 3272.00/3272.20/3273.55/3273.64/95598120 | 44305-SB2-982,44306-SB0-571 44571-SH3-J01,44306-SB2-984 |
7701351572,7701351571,7701351484,7701351480,7701351479,7701349938,7701349880,7701349874 |
39100-JX00A 39211-CN000 |
GP34-25-60XD | |||||||||||||||
44014-SDE-T00,44014SDCA00,44306SDETOOL | 3272.06/3273.75 | 44305-SH3-961, 44306-SH3-571, 44305-SE0-000,44571-SH3-960,44011-SH3-G12,44305-SH3-961 | 8200264664,39100-0153R,39101-5451R,6001548720,8200690053,820571122 | 1N00-25-500 | KIA : 0K558-25-50X KIA : 0K558-25-60X |
|||||||||||||||
44305-TL1-E00,44014TA0A00 | 3273.Y7 3272.S5 |
44571SL5N01 44571SS571 44571SS0030 44011SS571 44011SS0030 | 391014946R | 39100-AX000 39211-AY125 39101-AX005 39100-AX005 39101-AX000 |
MAZDA : M 0571 1510 MAZDA : M 0571 1510A MAZDA : M 0571 1500C MAZDA : M 0571 1500D MAZDA : M 0571 1600A MAZDA : M 0571 1600B MAZDA : MD0925500A MAZDA : MD0925600A |
|||||||||||||||
44014-S9A-571,44014-SDC-A50,44014-S9A-571, 44014-SCA-E00,44014-SCA-E01 | 3273.60/3273.62/3273.C7/3274.77/95606802/95646292/96184033 | 44305-SM4-983, 44571-SM4-A01, 44571-SL5-N01,44571-SV4-951,44011-SS0-930, | 77,013,524,157,701,300,000 | 39210-F4125 | MAZDA : G064-25-500 MAZDA : G064-25-600 MAZDA : G564-25-500A MAZDA : G564-25-600A MAZDA : G564-25-60X MAZDA : GR01-25-500 MAZDA : GR01-25-50X MAZDA : GR01-25-600 MAZDA : GR01-25-60X MAZDA : GU01-25-500 MAZDA : GU01-25-50XA MAZDA : GU01-25-50XC MAZDA : GU01-25-600 MAZDA : GU01-25-60XA MAZDA : GU01-25-60XD |
|||||||||||||||
44305-SAA-E00 | 9566722380/1495545080/1496138080/9567582280 | 44571-S07-000,44571SR3J01,44571SR3J02 | 299341X2 | 39100-1KA5B | GG06-25-50XC | |||||||||||||||
HONDA : 44014-SDC-A00 HONDA : 44014-SNG-000 HONDA : 44305-SDC-A00 HONDA : 44305-SEA-000 HONDA : 44305-SNG-571 HONDA : 44306-SDC-A01 HONDA : 44306-SDE-T00 HONDA : 44306-SEA-000 HONDA : 44306-SNG-571 |
1495537080;1495541080;9566722180,9566722180 | 44571SR3J03/44571SR3J53/44571ST7N00/44011S07000/44305SF1G10/44011ST3E00/44571-S07-950/44571-ST3-E50 | 9109186,775712978,775712980,775712998,775712999
|
NISSAN : 39100JA571 NISSAN : 39100JD24B NISSAN : 39100JD52B NISSAN : 39101JD24B NISSAN : 39101JD52B NISSAN : 39211JA00A NISSAN : 39211JD22B NISSAN : C9211JA00A NISSAN : C9211JD22B NISSAN : C92AAJA00A NISSAN : C92AAJD22B NISSAN : C9B11JA00A NISSAN : C9BAAJA00A |
MAZDA : CTA125500 MAZDA : FA8571500A MAZDA : FA8571600B MAZDA : FA8125600B MAZDA : FA8225500A MAZDA : FD8571500B MAZDA : FD8571600A MAZDA : FP0125500C |
|||||||||||||||
44014-SDC-A00,44014-SDC-A00,44014-SDE-T00,44014-SNG-000,44306-SNG-571 | 3272-EX 3272-HY 3272-KW 3273-HQ 3273-KJ |
43460-49125/43460-49165/43460-49315/43470-80013/43470-39545 | 1991909 | NISSAN : 39100-ED100 NISSAN : 39100-ED105 NISSAN : 39100-ED305 NISSAN : 39100-ED805 NISSAN : 39101-ED105 NISSAN : 39101-ED305 NISSAN : 39101-ED805 NISSAN : 39211-ED100 NISSAN : C9211-EL10A |
KIA : 0K2N122520 KIA : KK38825600 |
|||||||||||||||
44014-S6D-E01 | 3272.3C | 43410-12500,43410-57180 | TDJ10571 | 39100-AX000/39100-ED100 | HYUNDAI : 49500-25301 HYUNDAI : 49500-25302 HYUNDAI : 49500-25310 HYUNDAI : 49500-25311 HYUNDAI : 49500-25312 KIA : 49500-25301 KIA : 49500-25302 KIA : 49500-25310 KIA : 49500-25311 KIA : 49500-25312 |
|||||||||||||||
44014-TA0-A00,44305-TA0-J00,44305-TA2-J00,44305-TL1-E00,44305-TL3-000,44306-TA0-J00 | 1481451080/3272.9C/3273.3Q | 43460-19795 | LAND ROVER : RTC6811 LAND ROVER : STC3046 |
4571-M7226 40011-M5626 39100-M7270 39101-M7270 39113-M7275 39112-M7225 |
4950624A00/MB297343/MB297873/MB526582/MB176160/MB176161/MB176865 | |||||||||||||||
44014-S9A-571,44014-SDE-T51, 44014-SMT-G01,44306-SEA-N00,44306S9AN00 | 9619947580 | 43410-57120/43460-19865/43420-12430 | LAND ROVER : STC3051 LAND ROVER : TDJ00571 |
39101-1HS0A | HYUNDAI : 49500-25200 HYUNDAI : 49500-25400 KIA : 49500-25200 KIA : 49500-25400 |
|||||||||||||||
44306-SAA-000,44306-SFA-000,44306-SFB-000,44305-SAA-000 | 9619947580/9619947588/9619947688/9619947680 | 43410-12610, 43410-57130, 43410-12520,43410-0W270 | LAND ROVER : LR060382 LAND ROVER : TDB500110 LAND ROVER : TDJ500030 |
39100CA000 39101-CA100 39211-CA100 39100-CA100 |
49508-22A00 49508-22E00 | |||||||||||||||
44014SD5A51 | 9619947580/9619947588/9619947688/9619947680 | 43430-0K571/43430-0K030/43460-80033 | HONDA : 44305S74E00 HONDA : 44305S74E01 HONDA : 44305S74E51 ROVER : GCV1123 ROVER : TFB000070 |
39100-AX000 39211-AY125 39101-AX005 39100-AX005 39101-AX000 |
MB176872, MB297376, MB297377,MB526456,49500-2D002 | |||||||||||||||
44014-S91-571,44014S9A571,44305S9AN00,44305SCAG00 | CITROEN : 3272QF CITROEN : 3272TH CITROEN : 3272WX CITROEN : 3273QQ CITROEN : 3273TT CITROEN : 3273XR DS : 3272QF DS : 3272TH DS : 3273QQ DS : 3273TT PEUGEOT : 3272QF PEUGEOT : 3272TH PEUGEOT : 3272WX PEUGEOT : 3273QQ PEUGEOT : 3273TT PEUGEOT : 3273XR |
43420-5710/43470-5711/43430-5711 | GCV1194,TDJ100590 | 39211-CG000 39211-CG571 |
MB297438,MB297678,MB526831,MB297696,MB526473 |
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
After-sales Service: | Three Years |
---|---|
Condition: | New |
Color: | OEM Standard |
Certification: | CE, ISO, ISO/Ts16949 |
Type: | C.V. Joint |
Application Brand: | Nissan, Iveco, Toyota, Ford, Lada Mitsubishi FIAT Opel Peugeot Renault Citroen |
Customization: |
Available
| Customized Request |
---|
Are there any limitations or disadvantages associated with cardan shaft systems?
While cardan shaft systems offer numerous advantages, they also have some limitations and disadvantages that should be considered. Let’s explore these limitations in detail:
1. Angular Misalignment:
– Cardan shafts are designed to accommodate angular misalignment between the driving and driven components. However, excessive misalignment can lead to increased wear, vibration, and decreased efficiency. If the misalignment exceeds the recommended limits, it can put additional stress on the universal joints and other components, reducing the lifespan of the shaft and potentially causing mechanical failures.
2. Noise and Vibration:
– Cardan shaft systems can introduce noise and vibration into the equipment or vehicle. The universal joints and slip yokes in the shaft assembly can generate vibrations as they rotate, especially at high speeds. These vibrations can contribute to increased noise levels, potentially causing discomfort for passengers or affecting the performance of sensitive equipment. Proper balancing and maintenance of the shaft can help mitigate these effects, but they may still be present to some extent.
3. Maintenance and Lubrication:
– Cardan shaft systems require regular maintenance and lubrication to ensure optimal performance and longevity. The universal joints and slip yokes need to be properly lubricated to minimize friction and wear. If maintenance is neglected, the joints can wear out quickly, leading to increased vibration, noise, and potential failure. Regular inspections and lubrication are necessary to maintain the efficiency and reliability of cardan shaft systems.
4. Limited Flexibility in High-Speed Applications:
– Cardan shafts have limitations when it comes to high-speed applications. At high rotational speeds, the centrifugal forces acting on the rotating components can cause significant stress on the shaft and universal joints. This can result in increased wear, reduced lifespan, and potential failure. In such cases, alternative power transmission systems such as constant-velocity (CV) joints or direct drives may be more suitable.
5. Space and Weight Constraints:
– Cardan shaft systems require sufficient space for installation due to their length and telescopic design. In applications with limited space constraints, it may be challenging to accommodate the full length of the shaft, or modifications may be necessary to ensure proper fit. Additionally, the weight of the shaft can be a consideration, especially in applications where weight reduction is crucial. In such cases, alternative lightweight materials or drive systems may be more appropriate.
6. Cost:
– Cardan shaft systems can be relatively costly compared to other power transmission options. The complexity of their design, the need for customization, and the use of multiple components contribute to higher manufacturing and installation costs. However, it’s important to consider the overall benefits and performance of cardan shaft systems when evaluating their cost-effectiveness for specific applications.
7. Limited Misalignment Compensation:
– While cardan shafts can accommodate angular misalignment, they have limitations when it comes to compensating for other types of misalignment, such as parallel offset or axial displacement. In applications that require significant compensation for these types of misalignment, alternative power transmission systems with more advanced flexibility, such as flexible couplings or CV joints, may be more suitable.
Despite these limitations, cardan shaft systems remain widely used and offer numerous advantages in various applications. By understanding these limitations and considering the specific requirements of the application, engineers can make informed decisions regarding the suitability of cardan shaft systems or explore alternative power transmission options.
Can cardan shafts be customized for specific vehicle or equipment requirements?
Yes, cardan shafts can be customized to meet the specific requirements of different vehicles or equipment. Manufacturers offer a range of customization options to ensure that the cardan shafts are tailored to the unique needs of each application. Let’s explore how cardan shafts can be customized:
1. Length and Size:
– Cardan shafts can be manufactured in various lengths and sizes to accommodate the specific dimensions of the vehicle or equipment. Manufacturers can customize the overall length of the shaft to ensure proper alignment between the driving and driven components. Additionally, the size of the shaft, including the diameter and wall thickness, can be adjusted to meet the torque and load requirements of the application.
2. Torque Capacity:
– The torque capacity of the cardan shaft can be customized based on the power requirements of the vehicle or equipment. Manufacturers can design and manufacture the shaft with appropriate materials, dimensions, and reinforcement to ensure that it can transmit the required torque without failure or excessive deflection. Customizing the torque capacity of the shaft ensures optimal performance and reliability.
3. Connection Methods:
– Cardan shafts can be customized to accommodate different connection methods based on the specific requirements of the vehicle or equipment. Manufacturers offer various types of flanges, splines, and other connection options to ensure compatibility with the existing drivetrain components. Customizing the connection methods allows for seamless integration of the cardan shaft into the system.
4. Material Selection:
– Cardan shafts can be manufactured using different materials to suit the specific application requirements. Manufacturers consider factors such as strength, weight, corrosion resistance, and cost when selecting the material for the shaft. Common materials used for cardan shafts include steel alloys, stainless steel, and aluminum. By customizing the material selection, manufacturers can optimize the performance and durability of the shaft.
5. Balancing and Vibration Control:
– Cardan shafts can be customized with balancing techniques to minimize vibration and ensure smooth operation. Manufacturers employ dynamic balancing processes to reduce vibration caused by uneven distribution of mass. Customized balancing ensures that the shaft operates efficiently and minimizes stress on other components.
6. Protective Coatings and Finishes:
– Cardan shafts can be customized with protective coatings and finishes to enhance their resistance to corrosion, wear, and environmental factors. Manufacturers can apply coatings such as zinc plating, powder coating, or specialized coatings to prolong the lifespan of the shaft and ensure its performance in challenging operating conditions.
7. Collaboration with Manufacturers:
– Manufacturers actively engage in collaboration with customers to understand their specific vehicle or equipment requirements. They provide technical support and expertise to customize the cardan shaft accordingly. By collaborating closely with manufacturers, customers can ensure that the cardan shaft is designed and manufactured to meet their precise needs.
Overall, cardan shafts can be customized for specific vehicle or equipment requirements in terms of length, size, torque capacity, connection methods, material selection, balancing, protective coatings, and finishes. By leveraging customization options and working closely with manufacturers, engineers can obtain cardan shafts that are precisely tailored to the application’s needs, ensuring optimal performance, efficiency, and compatibility.
What is a cardan shaft and how does it function in vehicles and machinery?
A cardan shaft, also known as a propeller shaft or drive shaft, is a mechanical component used in vehicles and machinery to transmit torque and rotational power between two points that are not in line with each other. It consists of a tubular shaft with universal joints at each end, allowing for flexibility and accommodating misalignment between the driving and driven components. The cardan shaft plays a crucial role in transferring power from the engine or power source to the wheels or driven machinery. Here’s how it functions in vehicles and machinery:
1. Torque Transmission:
– In vehicles, the cardan shaft connects the transmission or gearbox to the differential, which then distributes torque to the wheels. When the engine generates rotational power, it is transmitted through the transmission to the cardan shaft. The universal joints at each end of the shaft allow for angular misalignment and compensate for variations in the suspension, axle movement, and road conditions. As the cardan shaft rotates, it transfers torque from the transmission to the differential, enabling power delivery to the wheels.
– In machinery, the cardan shaft serves a similar purpose of transmitting torque between the power source and driven components. For example, in agricultural equipment, the cardan shaft connects the tractor’s PTO (Power Take-Off) to various implements such as mowers, balers, or tillers. The rotational power from the tractor’s engine is transferred through the PTO driveline to the cardan shaft, which then transmits the torque to the driven machinery, enabling their operation.
2. Flexibility and Compensation:
– The cardan shaft’s design with universal joints provides flexibility and compensates for misalignment between the driving and driven components. The universal joints allow the shaft to bend and articulate while maintaining a continuous torque transmission. This flexibility is essential in vehicles and machinery where the driving and driven components may be at different angles or positions due to suspension movement, axle articulation, or uneven terrain. The cardan shaft absorbs these variations and ensures smooth power delivery without causing excessive stress or vibration.
3. Balancing and Vibration Control:
– Cardan shafts also contribute to balancing and vibration control in vehicles and machinery. The rotation of the shaft generates centrifugal forces, and any imbalance can result in vibration and reduced performance. To counterbalance this, cardan shafts are carefully designed and balanced to minimize vibration and provide smooth operation. Additionally, the universal joints help in absorbing minor vibrations and reducing their transmission to the vehicle or machinery.
4. Length Adjustment:
– Cardan shafts offer the advantage of adjustable length, allowing for variations in the distance between the driving and driven components. This adjustability is particularly useful in vehicles and machinery with adjustable wheelbases or variable attachment points. By adjusting the length of the cardan shaft, the driveline can be appropriately sized and positioned to accommodate different configurations, ensuring optimal power transmission efficiency.
5. Safety Features:
– Cardan shafts in vehicles and machinery often incorporate safety features to protect against mechanical failures. These may include shielding or guards to prevent contact with rotating components, such as the driveshaft or universal joints. In the event of a joint failure or excessive force, some cardan shafts may also incorporate shear pins or torque limiters to prevent damage to the driveline and protect other components from excessive loads.
In summary, a cardan shaft is a tubular component with universal joints at each end used to transmit torque and rotational power between non-aligned driving and driven components. It provides flexibility, compensates for misalignment, and enables torque transmission in vehicles and machinery. By efficiently transferring power, accommodating variations, and balancing vibrations, cardan shafts play a critical role in ensuring smooth and reliable operation in a wide range of applications.
editor by CX 2024-02-05